Home > Solution > Content
Maintenance methods of batteries for electric bicycles
- Aug 18, 2018 -

Electric vehicles have become the most popular means of transportation for the broad masses of the people. Electric vehicle batteries are an important part of electric vehicles. Often use of electric bicycle, the battery will appear some minor failures, then, what is the maintenance method of electric bicycle battery? Let's introduce below.

The maintenance methods of batteries for electric bicycles are as follows:


The vulcanized batteries were repaired by the electric vehicle battery repairing instrument. The fuzzy digital control theory was used to determine the state of the batteries, and at the same time the positive and negative frequency conversion particle waves were emitted continuously during charging and discharging. The hard lead sulfate crystallized in the batteries was removed in 10 to 20 hours.

Particle generator

The particle generator is connected in parallel to the battery to repair the battery of the electric vehicle. This method is better to repair the battery, but because the repair is more thorough, so if there is no overdischarge, for continuous use of the battery, is often completely eliminated the possibility of vulcanization.

Replenishing water

The way to repair the batteries of electric vehicles which have been used for half a year is to make up the water once. This can prolong the service life of the batteries and prolong the average time to more than 3 months. It should be noted that after each water replenishment, the battery is in the overcharge state to change the battery from "quasi-poor" to "poor" state, and this overcharge is good for improving the battery capacity.

Through the above content, have you already understood the electric bicycle battery repair method? With the above maintenance methods, you can start repairing electric vehicle batteries.

Tianneng Battery Group Co.,Ltd.